Safety Instructions; Symbols And Icons - Parkside PBHA 12 A1 Originalbetriebsanleitung

GB IE
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibrations
as low as possible. An example of how
to reduce vibration exposure is limiting
the working hours. For this purpose all
parts of the operating cycle have to be
considered (for example, times when
the electric tool is switched off and
times when it is switched on but run-
ning without any load).
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with the
following rechargeable batteries:
PAPK 12 A1, PAPK 12 A2, PAPK 12 B2.
This type of battery may only be charged
with the following chargers:
PLGK 12 A1, PLGK 12 A2.

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.
20

Symbols and icons

Symbols on the appliance:
Carefully read these operating in-
structions.
Wear personal protective equip-
ment. Wear eye protection!
Wear hearing protection!
Wear a dust protection mask!
Drilling/screwing
Impact drilling
This device is part of the
Parkside X 12 V TEAM series
Electrical appliances must not be
disposed of with the domestic
waste.
The impact drilling function must not
be used when the keyless chuck is
attached.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.