Service; Safety Instructions For Drills; Appliance-Specific Safety Instructions; Original Accessories/Auxiliary Equipment - Parkside PNS 300 B3 Originalbetriebsanleitung

5. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.

Safety instructions for drills

Safety instructions for all work
■ Hold the power tool only by the insulated
handles when you are carrying out work in
which the accessory tool or fasteners may
come into contact with concealed power
cables or the tool's own power cord. Contact
with a live wire may electrify exposed metal
parts of the tool and could give the operator an
electric shock.
■ Wear a dust mask.
Safety information for using long drill bits
■ Do not use a higher rotational speed than
the maximum permissible speed. At higher
speeds, the drill bit can bend slightly if allowed
to turn freely without being in contact with the
workpiece and this can lead to injuries.
■ Always start drilling at a low speed and with
the drill bit in contact with the workpiece. At
higher speeds, the drill bit can bend slightly if
allowed to turn freely without being in contact
with the workpiece and this can lead to injuries.
■ Do not exert excessive pressure and only
along the length of the drill bit (no lateral
pressure). Drill bits can bend and break which
can lead to a loss of control and injuries.
PNS 300 B3
Appliance-specific safety instructions
■ CAUTION, POWER CABLES! DANGER!
Ensure that you are not likely to contact power,
gas or water supply lines when you are working
with the power tool. If necessary, check with a
service line detector before you start to cut or
drill into a surface.
Residual risks!
Even if you operate this power tool properly, there
will still be residual risks. The following risks can
occur in relation to the power tool's design and
structure:
1. Lung damage, if no suitable dust protection
mask is worn.
2. Hearing damage, if no suitable hearing protec-
tion is worn.
3. Damage to health caused by hand-arm vibra-
tions if the appliance is used for extended
periods or is not properly used and maintained.
WARNING!
► The power tool creates an electromagnetic
field during operation. This field can, in
certain circumstances, impair active or
passive medical implants. To reduce the risk
of fatal injuries, we recommend that people
with medical implants consult their doctor and
the manufacturer of the medical implant
before operating this machine.
Original accessories/auxiliary
equipment
■ Only use the accessories and additional equip-
ment that are specified in the operating instruc-
tions and compatible with the appliance.
GB │ IE │ 5 ■