Form For Set Values Of Bwt Bestaqua 14, 18 - BWT bestaqua 14 Einbau- Und Bedienungsanleitung

7.1 Form for set values of BWT bestaqua 14, 18

Installation date:
Customer:
Model:
OBSERVE: THE SETTINGS 1-8 MAY BE CHANGED BY THE CUSTOMER
Parameter:
DATE:
TIME:
LANGUAGE:
START PRESSURE:
STOP PRESSURE:
STOP TIME DELAY:
CONDUCTIVITY LIMIT:
CONDUCTIVITY ALARM:
WCF set point:
WCF MIN:
WCF MAX:
PRESSURE START MAX:
PRESSURE STOP MAX:
STOP TIME DELAY:
MAX PUMP PRESSURE:
RINSING TIME:
WATER FILLING TIME:
AUTOMATIC RINSING:
RINSING HOUR:
...... / ...... / ..........
Value set at installation:
[Day / month / year]
[Hours : minutes]
Language selection
bar
bar
seconds
μS/cm
DISABLED /ALARM
Range: 20 ... 79 %
Range: 20 ... 59 %
Range: 59 ... 79 %
Range: 1.0 ... 7.0 bar
Range: 1.0 ... 7.0 bar
Range: 0 ... 19 s
Range: 8 ... 13 bar
Range: 0 ... 599 s
Range: 0 ... 99 s
ENABLE / DISABLE
TIME: 23:30 - 3:00
Fitter: Fitter:
& THE SETTINGS 9-19 ONLY BY THE BWT SERVICE.
Description:
Current date
Current time
Active language: English
Pmin = 2.0 bar
Pmax = 3.0 bar
Default setting: 10 s
Default setting: 500 μS/cm
Default setting: ALARM enabeld
Default setting: 50 %
Default setting: 40 %
Default setting: 60 %
Default setting: 2.0 bar
Default setting: 4.0 bar
Default setting: 10 s
Default setting: 9 bar
Default setting: 10 s
Default setting: 10 s
Default setting: ENABLE
Default setting: 02:00 a.m.
EN
63