Scope Of Delivery; Manufacturer; General Comments; Reading Of The Manual (Iom) - BWT bestaqua 14 Einbau- Und Bedienungsanleitung

1.2 Scope of delivery

The reverse osmosis unit BWT bestaqua 14, 18
consists of 3 core components:
for online and offline operation.
Fig. 1: BWT bestaqua 14 - Front view of the device
8
12
9
10
13
11
Fig. 2: BWT bestaqua 18 - Rear view of the device
1
2 7 6 4
The scope of delivery of the RO device includes:
Microprocessor controller:
1 OLED display (monochrome)
Function button: ON/OFF and standby
2
Function button: Upward
3
Function button: Downward
4
Function button: Confirmation/OK
5
Function button: Return to previous menu
6
Duo-colour LED red/green
7
Connections and service components:
Permeate connection (Ø 8mm)
8
Concentrate connection (Ø 8mm)
9
10 Feed water connection (¾" or Ø 10mm)
11 Electrical wiring with grounded PE mains plug "CEE7"
12 Blending valve (adjustments only by BWT service)
3
Optionally available, Item no. 823428:
13 Installation kit for external alarm contact (OUTPUT),
with M8 connector for the alarm output (DO).
5

1.3 Manufacturer

The RO devices BWT bestaqua 14 - 18 are
manufactured in the name of:
BWT water + more GmbH
Walter-Simmer-Straße 4
AT-5310 Mondsee
Phone: +43/6232/5011-0
Fax: +43/6232/4058
E-Mail: warewashing@bwt-group.com

1.4 General comments

Following the instructions in this Installation and Operating
Manual (IOM) helps the operator to run the reverse osmosis
BWT bestaqua 14, 18 reliably and economically. This Manu-
al (IOM) is part of the device and must be constantly available
at the place of operation for all assigned staff
members.

1.4.1 Reading of the manual (IOM)

The staff must have read and understood this IOM prior to any
work being carried out. A basic precondition for safe working
is the adherence to all stated safety and operating instructions.
In addition, the local accident prevention provisions and the
general safety provisions effective at the place of operation are
applicable. The illustrations in these instructions serve the basic
understanding and can deviate from the actual design of the
device. Justified claims cannot be derived from the same.
EN
35