Main Menu: Info (Information, Statistics); Menu: Info / System Info; Menu: Info / Reset; Menu: Info / Factory Default Settings - BWT bestaqua 14 Einbau- Und Bedienungsanleitung

EN
3.7 Menu: INFO (information, statistics)
The main selection menu appears with "Start"
being activated.
START
St a r t
START
I n f o
Fig. 22: Main selection menu: "Start", "Info"
The menu item
" SYSTEM INFO"
SYSTEM INFO:

3.7.1 Menu: INFO / SYSTEM INFO

In the "Info" selection menu, you can both read system information/
device data and counters and reload factory parameters.
The recommended target values of all settings
are documented in the form "Form for set values
of BWT bestaqua 14, 18" (see part 7.1).
1. Menu level (selection menu "Info")
SYSTEM INFO
RESET
FACTORY DEFAULT SETTINGS
Fig. 23: Menu Level 1: "Info"
2. Menu Level (password-protected parameters)
PASSWORD
******
PASSWORD ENTRY:
BWT Service: Please select and set each digit individually.
Firstly, by selection with the [ ] (arrow up) and [ ] (arrow
down) keys and, secondly, by confirming each digit.
48
2x
is active.
System information (ACTIVE)
Reset of statistic timer (BWT only)
Save factory settings as standard
(BWT only)
System password
Enter the password: ... ...
SYSTEM INFO
RESET
FACTORY DEFAULT SETTINGS
SYSTEM INFO
RESET
FACTORY DEFAULT SETTINGS
SYSTEM INFO
RESET
FACTORY DEFAULT SETTINGS
PASSWORD
******
Fig. 24: Programming procedure: "INFO" (system information)

3.7.2 Menu: INFO / RESET

The second menu item
"
reset of the statistic timer (deletes all values).
PASSWORD
******

3.7.3 Menu: INFO / FACTORY DEFAULT SETTINGS

The 3 menu item
th FACTORY DEFAULT SETTINGS
"
PASSWORD
******
permeate 03003 lit avg wcf xx %
pump worked for
x hours
pump on x times
Software ver 2.2
Service maintenance 364 days
Statistic timer (see page 60)
PASSWORD
******
is active.
RESET"
System password
Enter the password: ... ...
is active.
"
System password
Enter the password: ... ...