Additional Safety Instructions; Initial Operation; Removing/Inserting The Rechargeable Battery - Parkside PALP 20-Li B2 Originalbetriebsanleitung

explosion or risk of injury.
f) Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures over
130 °C can cause an explosi-
on.
g) Follow all instructions for
charging and never char-
ge the battery or the bat-
tery-powered tool outside
the temperature range
stated in the operating in-
structions. Incorrect charging
or charging outside the permit-
ted temperature range may dest-
roy the battery and increase the
risk of fire.
6) SERVICE
a) Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
b) Never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised
customer service centres only.
Additional safety
instructions
• Do not use any accessories
that are not recommended
by PARKSIDE. This can result
in electric shock or fire.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 20 V Team series. A
detailed description of
the charging process
and further informati-
on can be found in the
separate operating inst-
ructions.

Initial Operation

Removing/inserting the
rechargeable battery
Ensure that the device is
switched off.
1. To remove the battery (24) from the
device, press the release button (25)
on the battery and pull the battery (24)
out.
2. To insert the battery (24), push the bat-
tery (24) along the guide rail into the
device. You will hear it click into place.
GB IE
27