Herunterladen Diese Seite drucken

Safety Instructions For Battery Chargers & Blowers; Before Use; Charging The Battery Pack (See Fig. A) - Parkside PAK 16 A1 Originalbetriebsanleitung

Akku-kompressor; akku-luftpumpe
Vorschau ausblenden


Safety instructions for battery
chargers & blowers
This appliance may be used by
children aged 8 and above and
by persons with limited physical,
sensory, or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
The charger is suitable for
indoor use only.
If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
PAK 16 A1 / PALP 16 A1

Before use:

Charging the battery pack (see fig. A)
Always unplug the appliance before you re-
move the battery pack
the battery pack to the charger.
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hours. This guarantees
full battery power. Li-ion batteries can be
charged at any time without adversely affect-
ing their service life. Interruption of the charg-
ing process will not damage the battery.
Never charge the battery pack
the ambient temperature is below 10°C or
above 40°C. If a lithium-ion battery is to be
stored for an extended period, the charge level
should be checked regularly. The optimum
charge level is between 50% and 80%. The
storage climate should be cool and dry and
the ambient temperature should be between
0°C and 50°C.
Insert the battery pack
Insert the power plug into the socket. The
control LED
lights up red to indicate that the
appliance is charging.
The green control LED
charging process is complete and the battery
is ready for use.
Push the battery pack
Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the power plug from the mains
power socket.
from or connect
into the high-speed
indicates that the
back onto the




Diese Anleitung auch für:

Palp 16 a1