Personal Safety - Parkside PALP 20-Li B2 Originalbetriebsanleitung

GB IE
ractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must
match the outlet. Never
modify the plug in any
way. Do not use any ad-
apter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching
outlets will reduce risk of electric
shock.
b) Avoid body contact with
earthed or grounded sur-
faces, such as pipes, radi-
ators, ranges and refrige-
rators. There is an increased
risk of electric shock if your
body is earthed or grounded.
c) Do not expose power
tools to rain or wet condi-
tions. Water entering a power
tool will increase the risk of elec-
tric shock.
d) Do not abuse the cord.
Never use the cord for
carrying, pulling or
unplugging the power
tool. Keep cord away
from heat, oil, sharp ed-
ges or moving parts. Dama-
ged or entangled cords increase
the risk of electric shock.
e) When operating a power
tool outdoors, use an ex-
24
tension cord suitable for
outdoor use. Use of a cord
suitable for outdoor use reduces
the risk of electric shock.
f) If operation of the power
tool in a damp environ-
ment is unavoidable,
please use a residual cur-
rent circuitry. The use of a
residual current circuitry reduces
the risk of an electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what
you are doing and use
common sense when ope-
rating a power tool. Do
not use a power tool whi-
le you are tired or under
the influence of drugs,
alcohol or medication. A
moment of inattention white
operating power tools may re-
sult in serious personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will re-
duce personal injuries.
c) Prevent unintentional star-
ting. Ensure the switch is
in the off-position before
connecting to power sour-