Charging The Battery - Silvercrest SHAZB 29.6 B2 Bedienungsanleitung

6. Charging the battery

NOTES:
• Fully charge the battery 29 before us-
ing it for the first time.
• It takes approx. 3.5 hours to fully
charge the battery.
• After every use, hang the suction de-
vice 2 up in the holder of the base sta-
tion 26. This ensures that the suction
device will always work at full power.
The battery 29 is not damaged by reg-
ular charging.
Charging the suction device via the
base station
24
25
The wall socket must still be easily accessible
after connection.
21 2 26
A full charge is enough to use the vacuum
cleaner in ECO mode for approx.
40 minutes or in normal mode for approx
10 minutes.
1. Connect the power
cable of the power
adapter 25 to the
socket 24 on the
top right-hand side
of the base sta-
tion 26.
2. Plug the plug into a
suitable wall socket.
3. After every use,
hang the suction de-
vice 2 up on the
hook 23 of the
base station 26.
The LEDs of the
charging indica-
tor 21 are lit or start
flashing. When all
LEDs are lit, the bat-
tery 29 is fully
charged.
Connecting the suction device
directly to the mains
You can also charge the battery 29 when
the suction device is not in the battery charg-
er.
• Connect the power cable of the power
adapter 25 directly to the socket 4 un-
der the handle 3 of the suction de-
vice 2.
• Then plug the plug into a suitable wall
socket.
NOTE: the battery 29 has another charg-
ing indicator 28. This is only visible when
the suction device is not hanging in the base
station 26.
LED signals during charging
- Lit LEDs show the current charging state.
- A flashing LED indicates that the battery
is charging.
- When all 4 LEDs are lit continuously, the
battery is fully charged.
LED signals during operation
- Lit LEDs show the current charging state.
- Unlit LEDs show the consumed portion.
- One LED flashes: battery 29 weak, the
device will switch off soon.
NOTE: If the rotating brush 37 / hard floor
roller 40 is blocked, the vacuum cleaner
switches off. The LEDs 21 / 28 / 39 flash
for approx. 7 seconds. Only then can the
vacuum cleaner be switched on again.
29
GB