Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; Storage - Silvercrest SHAZB 29.6 B2 Bedienungsanleitung

Akku-staubsauger
Vorschau ausblenden Andere Handbücher für SHAZB 29.6 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

10. Cleaning and care

DANGER!
Pull the mains plug out of the wall socket
before you clean the device.
Allow the device to cool down before
cleaning.
CAUTION:
All parts becoming damp or wet, must
be dried completely prior to the next
use.
Do not clean using sharp objects or
abrasive cleaning agents.
Switch off the device and remove the bat-
tery 29 prior to cleaning.
Cleaning the battery
• Use a soft, dry cloth for cleaning the
battery 29.
Cleaning the suction device and
the floorhead
• For cleaning the suction device 2 and
the floorhead 35, use a soft, damp
cloth.
Cleaning the crevice nozzle and
the brush nozzle
• The crevice nozzle 44 and the brush
nozzle 43 can be cleaned under run-
ning water.
Cleaning the metal filter, the mo-
tor protection filter and the ex-
haust air filters
• The metal filter 10, the motor protection
filter 15 and the exhaust air filters 18
can be cleaned under running water.
Cleaning the paper filter
• The paper filter 13 can be emptied by
tapping on it.
Replacing the filters
• Check all filters regularly for damage or
deformations. Damaged or deformed
filters that can no longer be cleaned
must be replaced. This is necessary in
order to maintain the full performance
of the vacuum cleaner and to avoid
damage to the device.
• Filter sets can be reordered (see "Order-
ing accessories" on page 37).
Cleaning the rotating brush and
the hard floor roller
1. Remove the rotating brush 37 / the
hard floor roller 40 from the floorhead
(see "Changing the roller in the floor-
head" on page 31).
2. Tap the rotating brush 37 / hard floor
roller 40 gently to remove dust. If e.g.
hair has become tangled, pull it off with
your fingers.
3. Reinsert the rotating brush 37 / hard
floor roller 40 into the floorhead 35
(see "Changing the roller in the floor-
head" on page 31).
LED bar
The LED bar 39 does not require mainte-
nance. It is not possible to replace individual
LEDs or the LED bar.

11. Storage

If you do not want to use the device for ex-
tended periods, keep it in a dry location.
35
GB

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis