9.4
Metal filter
12
10
• When assembling, place the filter carri-
er 12 into the dust container 8 straight
on. Ensure that it sits completely straight
in the dust container.
9.5
Motor protection filter
15
13
34 GB
The metal filter 10 is
firmly attached to the fil-
ter carrier 12. The filter
carrier can easily be
pulled out using the met-
al bracket.
On top of the paper fil-
ter 13 sits the motor
protection filter 15.
• Remove the dust con-
tainer 8 from the suc-
tion device 2.
You can then remove
the motor protection
filter 15 from on top
of the paper filter 13.
9.6
Exhaust air filter
20
19
There are two small exhaust air filters 18 at
the top of the suction device 2.
1. To remove, pull on the unlocking mecha-
nism 20 on the filter cover 19 and lift it
off.
2. On the underside of the filter cover 19,
you will find the two exhaust air fil-
ters 18. Remove them.
3. Insert the new exhaust air filters 18.
4. Reinsert the filter cover 19, pull on the
unlocking mechanism 20 and close the
filter cover 19 completely. Then release
the unlocking mechanism 20.
18