Gastrodomus GRANISMART 1 BRS Betriebsanleitung Seite 86

7.5. Reassembling the washed components.
All of the washed and sanitized components must be carefully reassembled.
Some components must be adequately lubricated in order to ensure that they
work effi ciently.
Apply the seal (A) on the auger as shown in fi gure 59.
Fig.59
Using the vaseline provided, lubricate the seal (A) in the areas shown in fi gure
60.
Fig.60
Important Note: always check the seal integrity; should it be
worn, replace it with a new one.
Replace the seal (A) once a year at least.
Apply seal (B), lubricating the entire surface indicated by the arrows with vase-
line.
Fig.61
- 20_EN -
A
B
Introduce the auger, engaging head (C) with shaft (D).
Note: Rotate the auger to engage it.
Fig.62
C
Set the bowl back in place; slightly raise head (C) of the auger so that it meets
the seat provided (E) in the bowl. (Fig.63-64).
Fig.63
Fig.64
E
D
C
SL320000819 Ed.12 - 07-2013