Gastrodomus GRANISMART 1 BRS Betriebsanleitung Seite 84

7.2. Disassembling the dispensing tap
Before removing the bowl it is recommended to disassemble the tap; after
cleaning the tap must not be reapplied until the bowl has been correctly posi-
tioned in its seat.
Follow these instructions to disassemble the tap:
1 remove pin (F) without moving the tap lever;
Fig.49
2 take out the lever;
Fig.50
3 remove the spring and top body by pushing downward with a fi nger.
Fig.51
- 18_EN -
These components may be placed in a basin containing hot water (approx.
50°C); they must later be treated as described in section 7.4.
Fig.52
F
7.3. Removing the bowl and the lid
Removal of every granita bowl is fundamental to ensure correct machine clean-
ing and sanitization.
To remove a bowl correctly proceed as follows:
1 Take off the lid; (for model with lighted lid) remove the plug from the outlet
placed on the machine, protect it and make it sure it does not touch any
liquid;
Fig.53
2 raise the front part of the bowl to release it;
Fig.54
WATER
Never disassemble the tap if the product or any other liquid is
present inside the bowl.
SL320000819 Ed.12 - 07-2013