Gastrodomus GRANISMART 1 BRS Betriebsanleitung Seite 77

6.3. Starting a Granita machine 1 (granita/cooler)
The bowl of machines with a beverage cooling function is operated by means
of an on/off switch plus a refrigeration switch, which must be positioned as
follows:
Switch in position "I": machine powered and mixer on.
Fig.17
To dispense GRANITA:
Changeover switch : in position "I" refrigeration system on (freeze mode)
Fig.18
To dispense COLD DRINKS:
Changeover switch : in position "II" refrigeration system on (cooling
mode).
Fig.19
SL320000819 Ed.12 - 07-2013
6.4. Starting the Granita maker 1 (Electronic thermostat)
Switch (A) in position "I": Machine powered and mixer operating.
To make SLUSH DRINKS (GRANITA):
Switch (B) in position "I": Refrigerator system operating (slush drinks - granita).
To make COLD DRINKS:
Switch (B) in position "II": Refrigerator system operating (cold drinks).
To disable the FRIDGE (mixing only):
Deviator (B) in position "0": Refrigerator system off (mixing only).
Fig.20
C
A
ALARMS
In case of probe failure, the display will read A1.
Programming and adjustment outputs will be disabled.
6.5. Starting a Granita machine 2/3 (granita only)
For the sake of simplicity, we will describe the operation for the right-hand tank
only; for the other tanks, it is suffi cient to carry out the same sequence of opera-
tions on their switches.
Switch in position "I": machine powered.
2 TANKS
B
3 TANKS
Fig.21
- 11_EN -