Re-Commissioning After A Standstill Period - Bosch Rexroth LG 2/H Montageanleitung

Table 8: Further risks
Place
5 End of the conveyor belt
6 Open Liftgate
7 Open Liftgate
7
Situation Danger
Crush injury to body
parts caused by falling
objects
Crush injury to body
parts caused by falling
objects
Crush injury to body
parts caused by falling
Liftgate
5, 6

8.3 Re-commissioning after a standstill period

• Follow the steps for fi rst-time operation.
Action
Crush injury A constructive solution is required, e.g. by
means of a stopper.
Crush injury A design solution is required, e.g. by means of a
separator.
Crush injury Only qualifi ed personnel are permitted to stand
In the work and traffi c area.
Check the gas pressure spring regularly to
ensure adequate holding power.
358 734-22
3 842 358 734/2015-01, MIT: Liftgate, Bosch Rexroth AG
Starting up 37/44