IMS360
22
Technical data
NOTICE
Mechanical data
Housing
Mounting type
Weight
7.3 Right angle mating connector M12
Advice
` Strand cross-section of screened lines 0.14 ... 0.75 mm² / cable feed-
through: ø4 ... ø8 mm
•
Accessory SIKO art. no. "83006" (socket contact 5 pole).
Mounting
(Fig.
6)
1. Slide the pressure nut and housing along the cable.
2. Strip the cable, shorten the screen.
3. Strip wires and connect.
4. Screw housing with insert.
5. Tighten pressure nut.
Fig. 6: Right angle mating connector M12
Changing the angle position
1. Turn on insert, slightly pull out and rotate to desired angular position
(in steps of 45°).
2. Screw on insert.
8 Technical data
anodized aluminum
3-point mounting
~0.13 kg
IMS360 · Date 04.04.2023 · Art. No. 91019 · Mod. status 56/23
(Fig.
6))
Additional information
English