Connection Example 400 V 3N Ac - EOS Moment Control W Montage- Und Gebrauchsanweisungen

400 V 3N AC
Wiring diagram and connections
9.0 kW
N L1L2L3
Light
Leuchte
bauseitige Installation
Attention! Always connect the neutral wire N.
To be connected by a qualified electrician:
Drill an approx. 10 mm hole in the cabin wall near the entry area of the stove's connecting cable.
Feed the connecting cable through the borehole to the outside and connect to the power supply
in a distribution box suitable for wet rooms.
Please observe the wiring diagram and the regulations of the local power supplier (TAB 2000) and
the legal norms.
Caution! An adequate fuse and a mains circuit breaker must be installed in the stove's
power supply line on site.
5 x 2,5²
Zeitschaltuhr
timer
A
A1
A
A1
M
B
B1
5 x 1,5²
max. 10 m
Thermostat
Thermostat
L1 L2 L3 N N N PE
EN
Schutztemperatur-
begrenzer (STB)
overheating
protection fuse
 
reset
A1 B1
A2 B2
A3 B3
6,0 kW = 3x 2000 W
7,5 kW = 3x 2500 W
9,0 kW = 3x 3000 W
27