Assigning Names To The Sources - JVC KD-LX333R Bedienungsanleitung

If Audio Cruise does not function correctly
You may need to store the idling speed into
memory to make Audio Cruise function correctly.
NOTICE that a number of factors, such as
electric power steering, wipers, power
windows, air conditioner, etc. do generate
noises and, as a result, may cause Audio
Cruise not to function correctly. If this is the
main cause of malfunction, connect the
memory backup lead (yellow lead) directly to
the car battery to prevent these noises from
affecting Audio Cruise.
1 Start the engine and let it warm up.
2 Press and hold SEL (S) for more than 2
seconds so that one of the PSM items appears
on the display.
¢ or 4
3 Press
"CRUISE" appears on the display.
4 Turn the control dial to select either
"CRUISE 1" or "CRUISE 2."
¢ (or 4
5 Press
"+OR– SET."
6 Turn the control dial to select the desired idling
speed.
7 Press SEL (S) to finish the setting.
When the setting is complete, the unit
automatically checks to see if Audio Cruise
functions correctly with this new idling setting. If it
does not function correctly, Audio Cruise is
canceled automatically and the idling setting
becomes invalid.
• If this happens, see the NOTICE above.
30
repeatedly until
) to select
Assigning names to the
sources
You can assign names to CDs and the external
component. After assigning a name, it will appear
on the display when you select the source.
Sources
CDs* and
CD changer*
External component Up to 10 characters
* You cannot assign a name to a CD Text.
1
Select a source you want to assign a
name to.
ATT
SOURCE
2
Press and hold SEL (S) for more
than 2 seconds while pressing
DISP (D).
SEL
DISP
S
D
DIRECTORY
DISC
TRACK
CD
Ex.: When you select the CD as the
source.
Ex.: When you select the external
component as the source.
CONTINUED ON THE NEXT PAGE
Maximum number of
the characters
Up to 32 characters (up
to 40 discs)