Tuning In To A Preset Dab Service - JVC KD-LX333R Bedienungsanleitung

4
Press and hold the number button
(in this example, 1) you want to
store the selected service into for
more than 2 seconds.
EQ
1
7
DIRECTORY
FILEDISC
TRACK
CD
5
Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset
number.
• Preset DAB services are erased when the power
supply to the memory circuit is interrupted (for
example, during battery replacement). If this
occurs, preset the DAB services again.
40
"PI" flashes for a few seconds.
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, see page 39.
1
Select the DAB tuner (DAB1 – 3).
1 Press SOURCE ATT to select
ATT
SOURCE
DAB tuner as the source.
2 If necessary, press and hold
BAND
MODE
BAND MODE (M) repeatedly
M
to select the DAB band
number (DAB1, DAB2 or
DAB3).
Each time you press and hold the button,
the DAB band changes as follows:
D1
(DAB1)
2
Select the number (1 – 6) for the
preset DAB service you want.
EQ MONO
7 8 9
1 2 3
D2 D3
(DAB2) (DAB3)
INT RPT RND
11 6 12
10 5