Storing Your Own Sound Adjustments - JVC KD-LX333R Bedienungsanleitung

• When "CEQ LINK" is set to "LINK ON"
The selected sound mode can be stored in
memory for the current source.
Each time you change to the same source, the
same sound mode is also recalled and shown
on the display. The CEQ indicator also flashes.
• When "CEQ LINK" is set to "LINK OFF"
The selected sound mode effect applies to any
source.
Storing your own sound
adjustments
You can adjust the sound modes to your
preference and store your own adjustments in
memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press BAND MODE (M) to make the
number buttons work as different
function buttons.
BAND
MODE
M
2
Activate custom equalizer (CEQ).
The last selected sound mode is
EQ
1 7
recalled and applied to the
current sound.
Ex.: If you have selected "POPS" previously.
3
Select the sound mode you want.
Each time you press the button,
EQ
1 7
the sound modes changes as
follows:
USER
JAZZ
24
ROCK CLASSIC
HIP HOP POPS
4
Select the items you want to adjust.
SEL • See page 22 for details.
S
5
Adjust the level.
DIRECTORY
Equalization pattern changes as you
adjust the bass or treble.
Ex.: When you adjust "TRE (treble)."
6
Repeat steps 4 and 5 to adjust the
other items.
• To adjust the BBE
7
Repeat the same procedure to store
other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on page 23.
To increase the level.
To decrease the level.
II level, see page 22.