Selecting Preset Sound Modes (Ceq: Custom Equalizer) - JVC KD-LX333R Bedienungsanleitung

Selecting preset sound modes
(CEQ: custom equalizer)
You can select a preset sound mode (CEQ:
custom equalizer) suitable to the music genre.
1
Press BAND MODE (M) to make the
number buttons work as different
function buttons.
BAND
MODE
M
2
Activate custom equalizer (CEQ).
The last selected sound mode is
EQ
1 7
recalled and applied to the
current sound.
Ex.: If you have selected "USER" previously.
3
Select the sound mode you want.
Each time you press the button,
EQ
1
7
the sound modes changes as
follows:
USER
JAZZ
Ex.: If you select "ROCK."
ROCK CLASSIC
HIP HOP POPS
Indication For:
USER (Flat sound)
ROCK Rock or
disco music
CLASSIC Classical
music
POPS Light music
HIP HOP Funk or Rap +02
music
JAZZ Jazz music
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
on page 24.
• To adjust the bass and treble reinforcement levels or
II
to turn on/off the BBE
page 22.
To store a sound mode separately for
each playback source (CEQ Link)
You can select a sound mode and store it in
memory. It will be recalled every time you select
the same source and will be shown on the
display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, CD
and external components.
• See also "Changing the general settings
(PSM)" on page 25.
1
Press and hold SEL (S) for more than 2
seconds so that one of the PSM items appears
on the display.
¢ or 4
2
Press
(Custom Equalization Link).
3
Turn the control dial to select "LINK ON."
4
Press SEL (S) to finish the setting.
To cancel CEQ Link, repeat the same
procedure and select "LINK OFF" in step 3.
Note:
When you change the "CEQ LINK" setting, sound
mode (CEQ) is automatically reset to "USER."
Preset values
BASS TRE BBE
00 00 BBE OFF
+03 +01 BBE 2
+01 –02 BBE OFF
+04 +01 BBE OFF
00 BBE 2
+02 +03 BBE OFF
function temporarily, see
to select "CEQ LINK"
II
23