JVC KD-LX333R Bedienungsanleitung Seite 13

1
Press and hold SEL (S) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See pages 25 and 26.)
SEL
S
2
Select "AF–REG (Alternative
frequency/Regionalization reception)"
if not shown on the display.
3
Select the desired mode – "AF,"
"AF REG" or "OFF."
4
Finish the setting.
SEL
S
Note:
If a DAB tuner is connected and Alternative Reception
(for DAB services) is activated, Network-Tracking
Reception is also activated automatically. On the
other hand, Network-Tracking Reception cannot be
deactivated without deactivating Alternative
Reception. (See page 41.)
The same programme can be received on
different frequencies.
Programme 1
broadcasting
on frequency A
Programme 1
broadcasting
on frequency B
Programme 1
broadcasting
on frequency C
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
the current source (another FM station or CD and
other connected components.)
• TA Standby Reception will not work if you are
listening to an AM station.
TP/PTY
T
Press TP/PTY (T) to activate TA Standby Reception.
7 When the current source is FM, the TP
indicator either lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
If a station starts broadcasting a traffic
announcement, "TRAFFIC" appears on the
display, and this unit automatically tunes in to
the station. The volume changes to the
preset TA volume level (see page 17) and the
traffic announcement can be heard.
• If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
¢ or 4
signals. Press
for such a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, "TRAFFIC" appears on the
display, and this unit automatically changes the
source and tunes in to the station.
To deactivate the TA Standby Reception, press
TP/PTY (T) again.
Programme 1
broadcasting
on frequency E
Programme 1
broadcasting
on frequency D
to search
13