Assigning names to the sources
You can assign names to CDs and the external component connected to the LINE IN plugs.
After assigning a name, it will appear on the display when you select the source.
7
4
1
Select a source you want to assign a name to.
2
DISP
Note:
You cannot assign a name to an MD.
38
Sources
CDs
External component
5
Press and hold SEL (select) for more than 2
seconds while pressing DISP.
SEL
When you select the CD as
the source:
Maximum number of the characters
up to 32 characters (up to 46 discs)
up to 12 characters
2
3
When you select the external
component connected to LINE IN
as the source: