Using The Security Lock - JVC KD-LX333R Bedienungsanleitung

Using the security lock

You can prohibit the unauthorized use of this unit
by the others.
To use the security lock, you need to set the
password first. Once you set the password, the
unit will ask you to enter the password when you
turn on the unit for the first time after
re-installation (or after recovering the car battery
exhaustion).
CAUTION: Be careful not to forget the
password you have entered; otherwise, you
cannot use this unit. Keep the password in
your mind and more importantly on paper or
some other materials. You can write down
your password in the spaces provided on the
cover page.
Registering the password
You have to use 4 characters for your password.
You can use the following characters: Capital
letters (A – Z), small letters (a – z) and numbers
(0 – 9).
1
Press and hold both buttons for
more than 2 seconds.
SEL
S
The unit enters password entry mode.
2
Select the character set you want to
use.
Each time you press the button,
DISP
D
the character set changes as
follows:
Capital letter ( )
Numbers and symbols ( )
32
Small letter ( )
3
Select a letter.
4
Move the character entry position to
the next.
5
Repeat steps 2 to 4 until you enter
all 4 characters.
6
Finish the setting.
SEL The unit returns to the normal
S
operation mode.
How to Use the Provided CODE Sticker
Attach the provided CODE sticker in a
conspicuous position on your car to notify
would-be unauthorized users that the
security lock function is provided for this unit
and, therefore, will foil their efforts.