Other Convenient Rds Functions And Adjustments; Automatic Selection Of The Station When Using The Number Buttons - JVC KD-LX333R Bedienungsanleitung

To search your favorite programme type
1
Press and hold TP/PTY (T) for more
than 2 seconds while listening to an
FM station.
TP/PTY
T
The last selected PTY code appears.
2
Select one of the PTY codes.
EQ MONO
7 8
1 2
Ex.:When "ROCK M" is selected.
3
¢ or 4
Press
search for your favorite programme.
• If there is a station broadcasting a programme
of the same PTY code as you selected, that
station is tuned in.
• If there is no station broadcasting a programme
of the same PTY code as you selected, the
station will not change.
Note:
In some areas, the PTY search will not work correctly.
16
INT RPT RND
9 11 6
3 10 5
OR
to start PTY
Other convenient RDS
functions and adjustments
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS
station, something different will happen. If the
signals from that preset station are not sufficient
for good reception, this unit, using the AF data,
tunes in to another frequency broadcasting the
same programme as the original preset station is
broadcasting. (Programme search)
• The unit takes some time to tune in to another
station using Programme search.
12
To activate programme search, follow the
procedure below.
• See also "Changing the general settings
(PSM)" on page 25.
1
Press and hold SEL (S) for more than 2
seconds so that one of the PSM items appears
on the display.
¢ or 4
2
Press
"P(Programme)-SEARCH."
3
Turn the control dial to select "SEARCH ON."
Now programme search is activated.
4
Press SEL (S) to finish the setting.
To cancel programme search, repeat the same
procedure and select "SEARCH OFF" in step 3.
to select