Settings In The Parameter Menu - STIEBEL ELTRON DHE 18 Bedienung Und Installation

oPERATIoN
Settings and displays
4.9

Settings in the parameter menu

4.9.1 Activating the parameter menu
f Briefly press and hold "i" for more than 5 seconds until "P 1" f
appears, then continue by briefly pressing "i".
f In the selected parameter menu, turn the temperature selec- f
tor to the required display / setting.
4.9.2 Parameter menu
Menu Description
P 1 ECO water and energy
saving function
P 2 Temperature limit Tmax OFF | 20.0 | 20.5 ... °C or
66 | DHE
Selectable display | Explanations
setting
OFF | ECO1 | ECO2 | ECO3 The ECO function enables you to limit the flow rate to a maximum
value.
Flow rate limit:
8 l/min with "ECO1" | 7 l/min with "ECO2" | 6 l/min with "ECO3" |
No flow rate limit with "OFF".
The temperature limit allows you as a user to restrict the adjustable
68 | 69 ... °F set temperature at the appliance to a maximum value. Check that the
upper temperature limit has been correctly applied.
Your qualified contractor can set an additional temperature limit for
anti-scalding protection. This temperature then dictates the upper
limit of the setting range for the temperature limit function.
Symbol |
display
| | |
www.stiebel-eltron.com