Other Symbols In This Documentation / On The; Appliance; Units Of Measurement; Safety - STIEBEL ELTRON HSTP 200 Bedienung Und Installation

operation

safety

1.2 other symbols in this documentation / on the

appliance

General information is identified by the symbol shown
on the left.
f Read these texts carefully. f
symbol
Damage to the appliance and environment
!
Appliance disposal
Appliances with this marking are not suitable for general waste
disposal, and should therefore be collected and disposed of sepa-
rately
f This symbol indicates that you have to do something. The ac- f
tions you need to take are described step by step.
1.3

units of measurement

Note
All measurements are given in mm unless stated oth-
erwise.
WWW.stieBel-eltron.com
2. safety
2.1

intended use

This pressure appliance is designed to heat DHW.
Any other use beyond that described shall be deemed inappropri-
ate. Observation of these instructions and of instructions for any
accessories used is also part of the correct use of this appliance.
Any modifications or conversions to the appliance void all war-
ranty rights.
2.2

general safety instructions

DANGER Scalding
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
Where children or persons with limited physical, sensory
or mental capabilities are allowed to control this appli-
ance, ensure that this will only happen under supervision
or after appropriate instruction by a person responsible
for their safety.
Children must be supervised to ensure that they never
play with the appliance!
Note
The appliance is under pressure.
During the heat-up process, expansion water will drip
from the safety valve. If water continues to drip when
the heat-up process is completed, please inform your
qualified contractor.
2.3

ce designation

The CE designation shows that the appliance meets all essential
requirements according to the:
- Electromagnetic Compatibility Directive
- Low Voltage Directive
2.4

test symbols

See type plate on the appliance.
hstp | 17