Appliance Handover - STIEBEL ELTRON DHE 18 Bedienung Und Installation

INSTALLATIoN
Commissioning
f Connect the programming unit connecting cable to the PCB. f
Note
For undersink installation, the appliance cover should be
turned the other way up for easier operation; see chapter
"Installation alternatives / Rotated appliance cover".
f Hook the appliance cover at the top rear into the back panel. f
Pivot the appliance cover downwards. Check that the appli-
ance cover is securely seated both top and bottom.
www.stiebel-eltron.com
f Tick the selected connected load and rated voltage on the ap- f
pliance cover type plate (on both sides). Use a ballpoint pen
to do this.
f Secure the appliance cover with the screw. f
f Fit the fascia to the appliance cover. f
f Remove the protective film from the user interface. f
f Switch on the power supply. f

11.2.1 Appliance handover

f Explain the appliance function to users and familiarise them f
with how it works.
f Make the user aware of potential dangers, especially the risk f
of scalding.
f Hand over the instructions. f
DHE | 83