Personal Safety - Storch Spider 2800 L Übersetzung Der Originalanleitung

e. When operating a power tool outdoors, use an extensi-
on cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is una-
voidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.

3. PERSONAL SAFETY

a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the infl uence of drugs,
alcohol or medication. A moment of inattention whi-
le operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your fi nger on the switch or energising
power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rota-
ting part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or jewelle-
ry. Keep your hair and clothing away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g. Always operate the Spider
cleaner (e.g., STORCH VacTec 30 M, Art. No. 65 25
50). This reduces the dust exposure at the workplace to
a minimum and removes the need for health protection
measures.
h. Do not let familiarity gained from freuquent use of
tools allow you to become complacent and ignore, tool
safety principles. A careless action can cause severe injury
within a fraction of a second.
4. POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or bat-
tery pack from the power tool before making any adjust-
ments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the
power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or bin-
ding of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use. Many
Original instruction
2800 L with a vacuum
®
accidents are caused by poorly maintained power tools.
f. Use the power tool, accessories and tool bits etc. in
accordance with these instructions taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those inten-
ded could result in a hazardous situation.
g. Keep handles dry, clean and free of oil and grease.
Slippery handles do not allow for safe handling and con-
trol of the tool in unexpected situations. power tools that
have the switch on invites accidents.
5. SERVICE
a. Have your power tool serviced by a qualifi ed repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is main-
tained.
b. Only use original parts for repair and maintenance. The
use of incompatible accessories or spare parts can result
in electric shocks or other injuries.
Symbols used in this manual
68