Assembly - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

Assembly

Assembly
Assembly
If required, Heidolph offers a professional full assembly and commissioning service,
including the device and all supplied accessories.
Most of the sensors and valves of the automatic module are
plugged into the coded connectors on the back of the control box
(sensor cards).
Thanks to the coding of all connectors, all units are automatically
detected and assigned in the device software!
All other units must be plugged into the corresponding marked
connection sockets and terminals. For a detailed description of all
connections, please refer to the assembly instructions supplied.
Faulty or disconnected units are detected and displayed when
performing a system test (integrated software function).
The supplied assembly instructions describe all steps for the correct connection of all
tubes and cables between the control box, the components supplied (vessels, sensors,
valves, glassware) and the evaporation system in detail!
CAUTION: Material damage, loss of production
Due to improper system tubing and wiring as well as unauthorized
changes to the system, there is a risk of direct and indirect damage
to property!
➜
➜
➜
The professional mounting and installation of the device including
the supplied accessories is within the sole responsibility of the
operator!
Noncompliance will invalidate any warranty against
Heidolph Instruments.
The operator is solely liable for all damage resulting from unau-
thorized changes or modifications to the unit, from the use of
unauthorized or non-genuine spare parts and accessories, or from
disregarding the safety instructions and hazard warnings or the
manufacturer's instructions!
For system tubing and wiring, follow all notes and instructions
provided in the assembly instructions provided (part number
01-001-009-12-0).
Do not make any unauthorized changes to the device, system,
tubing, nor the existing cable connections.
If necessary, contact our technical service (see "Contact infor-
mation Heidolph international" on page 145).
85