Access System Information; Firmware And Software Update - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

Operation

Access system information

Information
The
module.
➜
To view system information, open the
button in the footer.
Versions
➜ Use the
about the software and firmware for your product.
➜ Scan the stored QR code with a suitable device to access additional product infor-
mation and relevant documents via our homepage.
➜
Close the view with

Firmware and software update

The system is updated using an update file stored on a USB stick. The upgrade includes
the system's software and firmware by default.
➜ Open the safety cover of the USB port on the control panel and insert the USB stick
with the update file.
Main menu
➜
Open the
System update
➜
Tap the
appears only if a USB stick with a valid update file is detected on the USB port!):
➜ Press to confirm the security prompt and to update the device software.
➜ Follow the instructions on the display
➜
To cancel the operation and return to the previous menu without making any
changes, touch the button
➜ Restart the device after the software update.
➜
After the restart, the firmware of the device can be updated. To do this, also
confirm the corresponding security prompt with
➜ Watch the progress bar and restart the device after the firmware update!
➜
After the update, unplug the USB stick and put the security cover back into the USB
port.
view displays all version and license information for your automatic
Licenses
and buttons to access the desired information
. The display returns to the
:
button at the bottom of the main menu (this button
.
Main menu
and touch the
Main menu
,
138
Info
function
.