General Notes; Basic Product Information; Guidelines Applied, Product Certification; California Residents - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

General notes

General notes

Basic product information

Guidelines applied, product certification

CE Marking
The device complies with the following standards:
•
•

California Residents

Important information for California residents regarding Prop 65. Please visit www.
P65Warnings.ca.gov for more information.

Residual risk

The device was designed and manufactured in accordance with the latest technical
standards at the time of development and the recognized safety regulations. During
installation and use, as well as during maintenance work, repairs and cleaning, there
are nevertheless certain residual risks associated with the device described.
These are identified and described at the appropriate points in this document.

Intended use

The Hei-VOLUME Distimatic Pro automatic module, according to the EU Machinery
Directive 2006/42/EC is a partly completed machine that has been specially developed
for the automatic filling and draining of Heidolph rotary evaporators.
The following processes can be controlled with the automatic module:
– filling educt
– drainage of distillate
– drainage of condensate
– drainage of residue (optional)

Reasonably foreseeable misuse

For use under conditions or for purposes deviating from the intended use, additional
measures may become necessary, and/or specific guidelines and safety regulations will
have to be observed (see section "Special hygiene measures for the use of labora-
tory equipment in food, cosmetics and pharmaceutical production" on page 83).
Corresponding requirements must be evaluated and observed by the operator in each
individual case.
Compliance with and implementation of all relevant guidelines and safety measures for
the respective field of application is within the sole responsibility of the operator.
All risks resulting from improper use are solely borne by the operator.
The device may exclusively be operated by authorized and instructed personnel.
Training and qualification of the operating personnel as well as ensuring that the device
is operated with responsibility are the sole responsibility of the operator!
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
80