Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung Seite 121

Operation
Parameters
Cycles
Fill
Drain residue
Drain distillate
Distillate
End of process
The parameters
For an evaporation cycle, you can specify either a maximum filling
rate OR a maximum number of distillate drainage steps.
➜
Confirm or cancel all changes with
Function
Maximum number of evaporation cycles
▪ Selection switch in position
▪ Selection switch in position
number of cycles in the selection field (adjustment via
plus/minus keys).
Touch the / icon to switch between the two options.
Maximum filling rate
▪ Selection switch in position
▪ Selection switch in position
number of filling operations in the selection field
(adjustment via plus/minus keys).
Touch the / icon to switch between the two options.
Residue draining time
▪ Selection switch in position
time.
▪ Selection switch in position
draining time in the selection field (adjustment via plus/
minus keys).
on off
Touch the / icon to toggle between the two options.
Distillate draining time
▪ In the selection field, define a distillate draining time
(adjustment via plus/minus keys).
Maximum number of distillate drainage steps
▪ Selection switch in position
▪ Selection switch in position
number of distillate drainage steps in the selection field
(adjustment via plus/minus keys).
Touch the / icon to switch between the two options.
Specify here whether the distillate and/or residue are
drained at the end of the process. Touch the corresponding
check box to enable (check mark) or disable (blank) the
option.
Fill Distillate
and
ok cancel
or
120
 no limit.
 define a certain
 no limit.
 define a maximum
off
 no defined draining
on
 define a residue
 no limit.
 define a maximum
are mutually exclusive!
.