Commissioning
System check
All connected sensors and actuators or peripherals are displayed in the
check
menu. Various tests can be carried out via the
ensure the functional and operational safety of the system:
Main menu
➜
Open the
System check
footer. The
➜
Error-free components are indicated by the
➜
Faulty components are marked with
top of the list (in the example, flask level sensor S4). Verify that the affected
component is connected correctly.
➜
Swipe up or down on the touch panel to scroll through the list.
TEST
➜
Touch the
System check
open the
CAUTION: Property damage, loss of production
Faulty connections or signaling can lead to malfunctions or uncon-
trolled switching operations!
Leaks reduce the performance of the entire system.
➜
➜
and touch the
menu appears:
function button in the header of the
sub-menu.
Correct any indicated errors and/or detected malfunctions
immediately.
In the event of a continued fault indication/malfunction,
contact your local sales representative or our technical service
department, see "Contact information Heidolph international"
on page 145.
System check
System check
function button in the
status display.
, the corresponding entries move to the
System check
110
System
sub-menu to
menu to