Perform Overpressure Test - Heidolph Hei-VOLUME Distimatic Pro Betriebsanleitung

Commissioning
Test individual valves and signal lights
System check
➜
In the
TEST
➜ Touch the
– The valve or signal light is switched once (note the color change of the
corresponding symbol!).
– Several individual tests can be carried out in parallel.
➜ Touch the associated
tests are not automatically terminated!
➜ Press to close the menu.

Perform overpressure test

With this test function, the system can be tested for leaks.
Check system
➜ Open the
Overpressure
➜
Touch the
function (button changes to orange).
menu, each individual entry is assigned a
button of the desired component to start an individual test.
TEST
button again to end the individual test. The individual
menu as described in section "" on page 109.
function button in the footer to activate the test
112
TEST
button.