Werbung
MBD ?
MBD xxxxxx
MIN
MIN ?
MM
MOD ?
MUL ?
MUL+|-xx.yyyyy
'N'
N1..9999
NCAL ?
NCAL dd.mm.yy
Code
NCOR ?
NCOR dd.mm.yy
NOR
NUM ?
NUM XXXX
'O'
OUT 0 or OFF
OUT 1 or ON
OUTR ?
OUTR xxxx
'P'
PF ?
PF xxx
PRE
PRE ?
PRE+/-xxxx.yyyyyy
PREMIN
PREMAX
PRI or P
A
Returns the transmission speed of the RS485 port
Changes the transmission speed of the RS485 port (4'800, 9'600, 19'200, 38'400,
56'000, 57'600, 76'800, 115'200, 128'000, 187'500, 230'400, 256'000 bds) default =
128'000 bds
Activates the Min measuring mode
Returns the Min measured value (if any of the modes Min/Max/Delta is activated)
Actives the millimeter unit
Returns the active mode (NOR or MIN or MAX or DEL)
Returns the value of the multiplicative factor
Modify the multiplicative factor (+|-0.00100 ... +|-10.00000)
Loads the readings counter
Returns the date of the next calibration of the module
Sets the date of the next calibration of the module
Function
Returns the date of the next measuring correction
Sets the date of the next measuring correction
Activates the Normal measuring mode (deactivates the min/max/delta values)
Returns the module number
Modifies the module number (0...9999)
Disables automatic data transmission
Enables automatic data transmission
Returns the data rate output [ms] (0=max rate)
Modify the data rate output (0...9999 ms)
Returns the user probes filter time constant [ms]
Modify the user probes filter time constant (0...9999 ms)
Actives the memorized preset value
Returns the preset value
Insert the preset value (max 9999.99999mm/390''). Sign is recommended.
Preset on the Min value
Preset on the Max value
Sends the measured value [and the tolerance sign <, >, = ]
56
Werbung
Kapitel
