Werbung
Code
COR 0 or OFF
COR 1 or ON
COR PP /
+|- x.yyyyyy
COR O?
'D'
D
DEL
DEL ?
'E'
ECAL ?
ECAL 0
ECOR ?
ECOR 0
A
Function
Disables the measuring correction
Enables the measuring correction
Insert or modify a point of the correction. PP=Point Number [0...25].
Max correction : 2.0mm/0.1''
Returns the activation status of the point par point correction (ON, OFF)
Unselects all channels and disables functions A, F , L, M and N
Activates the Delta measuring mode
Returns the Delta value (if any of the modes Min/Max/Delta is activated)
Returns a calibration error
NO.ERR
No error
GAGE.ERR Invalid gages
PRB.ERR
Probe not connected
REF .ERR
Invalid probe displacement
CAL.ERR
Invalid calibration procedure
MOVE.ERR Probe not stable
TIME.ERR Timeout (> 60s)
Clears the calibration error
Returns a correction point to point error
NO.ERR
No error
PNT.ERR
Invalid point number
COR.ERR
Invalid correction
DIR.ERR
Invalid direction
PRB.ERR
Invalid probe type
RES.ERR
Not in highest resolution
NUL.ERR
Empty correction
CMD.ERR Invalid remote command
Clears the correction point to point error
54
Werbung
Kapitel
