Reading; Introduction - Francotyp-Postalia FPi 6600 Betriebsanleitung

7

Reading

Introduction

The reading option allows the system to read special codes that are printed on
the documents. The code contains information about the processing of the documents.
The system can read the following code types:
• 1-track OMR: Optical Mark Recognition
• BCR: BarCode Reading, 1D
• Barcode reading 2D
• Flex 1-9
Depending on the settings, the code tells the system if:
• The document set is complete
• Enclosures must be added to the set
• The system must stop
• The set is complete (no pages are missing)
• The envelopes are transported to the side exit or to the stacker
The sheets with the printed code are placed in a feeder. Depending on the programmed
code, the other feeders can be used as selective feeders to add enclosures.
In case of a Z-fold, the address has to be printed on the last page of the set (see
orientation on page 85 for the code position). With the other fold types, the first sheet of a
set always contains the address. A full length code is printed on every sheet of a set. The
code must appear at the same location on every page regardless of the actual code length.
The code on the last sheet of the set contains the insert instruction (unless reverse reading
is used, see Reverse reading on page 84). The other sheets carry the accumulate
7
Document
83