Test Menu; Running Diagnostics - Francotyp-Postalia FPi 6600 Betriebsanleitung

Test Menu

The Test menu can be used to check the system, reset all photocells and execute reading
tests.
The menu consists of the following functions:
6
• Diagnostics - Use this function to check if all motors, clutches and sensors are
correctly connected. This test derives the status of the actuators and clutches by
briefly activating the actuators and then measuring the current (see
diagnostics
• Reset photocells - Use this function to calibrate all photocells (see
on page 99);
• OMR test - Use this function to test the OMR functionality (see
on page 95);
• BCR test - Use this function to test the BCR functionality (see
on page 89).

Running diagnostics

To run a diagnostics of the system:
1. In the Test menu, press the [Diagnostics] button. The Hardware test screen appears.
2. Remove all documents and envelopes and close all covers before starting the diagnose.
76
on page 76);
Running
Resetting photocells
Running an OMR test
Running a BCR test