High Capacity Conveyor Belt (CS-2)
The high capacity conveyor belt is designed for envelope transport from the inserter or
franking device. The conveyor belt has two operation modes:
• The belt moves continuously.
• The belt moves in intervals. The belt moves about 45 mm (1.7 inch) each time a
sensor detects the passage of an envelope.
The guide plate and side guides prevent the envelopes from falling off the belt.
Installing the High Capacity Conveyor Belt
To install the high capacity conveyor belt:
1.
Move the conveyor belt to the correct position.
2.
Connect the adaptor C to the connecting lead.
3.
Connect the mains lead cable to the adapter.
4.
Connect the mains lead cable to the socket outlet.
3
37