Envelope Settings - Francotyp-Postalia FPi 6600 Betriebsanleitung

Envelope settings

In the 'envelope settings' menu you can define the envelope properties and switch the
sealing on and off.
5
In the top of the screen, three selection buttons are displayed, from which one can be
selected. The selected settings button will be highlighted.
•
Press the
envelopes are fed with closed flap. Use the first
dimensions. It is also possible to select ISO standard envelopes or dimensions in
inches (depends on the installation settings). The envelope height can be set between
90 mm (3.5 inch) and 162 mm (6.38 inch). Use the second
weight of the envelopes in grams. Weight information is used for selecting exit settings
Exit select settings
Use the
• Press the
are fed with open flap. Use the upper
The envelope height can be set between 90 mm (3.5 inch) and 162 mm (6.38 inch).
It is also possible to select ISO standard envelopes or dimensions in inches (depends
on the installation settings). Use the second
flap height can be set between 32 mm and the envelope height minus 32 mm (1.26
inch).
• Press the
(no envelope mode). This can be useful for jobs, where documents only have to be
sorted and/or folded. In this case, the exit will be set to the stacker.
58
button to select an envelope with closed flap. This means that the
on page 65.
button to define wether the envelopes have to be sealed or not.
button to select an envelope with open flap. This means that envelopes
button to define a job without inserting the documents in envelopes
button to enter the applicable
button to enter the applicable dimensions.
button to enter the flap height. The
button to enter the