Performing A Test Run - Francotyp-Postalia FPi 6600 Betriebsanleitung

5. Press [OK] to confirm the selected free job number.
The job settings menu opens. The meaning of all buttons and settings is explained in
Job settings.
5
6. Press [Save] to save the job with the entered settings under the specified job number
and name.
To name a job, see
7. Press the [1x] button to verify that the insert position and address position are correct
(see Verifying the Insert Position
page 45).

Performing a test run

Before starting a job, it is possible to perform a single test run with the settings of the current
job.
To perform a test run:
1. In the home menu, use the arrows to scroll through the Job selection list.
50
A new selected job number starts with default settings.
Job name settings
on page 47 and
on page 65.
Adjusting the address position on