The "job settings" menu (supervisor) can be opened from the "supervisor menu". From this
menu system parameters can be set.
The "job settings" menu shows the following functions:
6
• Flap Closer - Use this option to improve the envelope sealing process by changing
the flap closer offset for one or more defined jobs (see
Offset
• Envelope clearing - Use this option to define when envelopes are cleared from the
system (see
• System output - Use this option to change the output mode for one or more defined
jobs (see
• Document offset - Use this option to change the document offset for one or more
defined jobs (see
• BRE offset - Use this option to change the BRE offset for one or more defined jobs
(see
Changing the BRE Offset
Flap Closer Offset
To change the flap closer offset for a selected job:
1.
Use the arrows next to "Select job" to select for which job (Job 1-25 or Auto) you want
to make the changes.
78
on page 78);
Changing the Envelope Clearing
Changing the System Output
Changing the Document Offset
on page 79);
on page 79);
on page 80);
on page 81).
Changing the Flap Closer