Job Settings (Supervisor) - Francotyp-Postalia FPi 6600 Betriebsanleitung

3. In the Hardware test menu, press the [Start diagnose] button.
When the test is finished, the Status report is shown, showing a list of all problems
found during diagnostics.
4. If no problems were found, press the [OK] button.
If problems have been found that can not be solved, call your service organization.

Job Settings (Supervisor)

Job settings normally will be changed by a service engineer only.
Therefore first consult the supplier's Helpdesk before changing any
settings. Changes to the job settings can result in malfunctioning
of jobs.
6
77