Terminology - Francotyp-Postalia FPi 6600 Betriebsanleitung

11

Terminology

Terminology
Term
Address carrier
Address position
11
Automatic
Automatic job
Barcode Read-
ing
(BCR)
Business Reply
Envelope (BRE)
118
Description
The address carrier is the document that carries the address of the
person for who the mail-set is meant. The address must remain visible
while enclosures are added and the document-set is folded. The fold
type and selected envelope must ensure that the address is visible be-
hind the window in the envelope. For personalized mailings there is al-
ways an address carrier present as long as envelope printing is not
supported. Normally there is one address carrier.
Position of the address on the address carrier, measured from the upper
left corner. The address position consists of a horizontal x coordinate,
a vertical y coordinate, a horizontal width w and a vertical height h.
The feature of an Inserting System to automatically determine its Job
settings by measuring the sizes of documents and envelope. From all
Feeders that are loaded one sheet will be taken. Based on the maximum
document length (which is also the length of the documentset) and the
length of the envelope the fold type is determined.
A job that is created with the Automatic functionality.
Barcode Reading is intended for reading and interpreting printed bar-
codes. The codes give information to the Inserting system about how
to build-up and handle a set.
Envelope included in outgoing mail-sets for addressee response pur-
poses.