Verifying The Insert Position - Francotyp-Postalia FPi 6600 Betriebsanleitung

Verifying the Insert Position

To make a good insert of the document set into the envelope, the envelope should be
positioned correctly. The document set is inserted correctly if the flap folding line of the
envelope is positioned under the blue indicator B.
To verify the insert position:
1. Choose a job and press the [1x] button.
2. Lift the unlocking lever of the upper unit and pull up the upper unit.
3. Press No until the question about envelope position appears.
4. Press No again and follow the instructions on screen.
This adjustment must only be checked in case of problems or when
changing the envelope type.
4
47