PeakTech 2170 Bedienungsanleitung Seite 63

10. Press FUNC. key four times to select DCR mode. The
primary LCD display will show the resistance value. The
secondary parameter is omitted and the D/Q/ESR key,
SEL/PAL key and FREQ key are not available.
Note:
The phase angle θ will be shown on secondary display only in
Auto-LCR mode. During Auto-R mode or DCR mode, the
secondary parameter is not available.
9. To use Adapter
WARNING:
1. Please use an AC power adapter with the specifications
below, using other AC power adapter may damage your
instrument.
2. The AC power adapter can only be used indoors.
3. Please plug the AC power cord into an electrical outlet first
and then firmly insert DC plug into DC input end in the right
of the meter. When unplugged, firstly pull out the DC plug
perpendicular to DC input end and then unplug the AC
plug from the electrical outlet.
4. In use, it is a normal phenomenon that the AC power
adapter will be hot.
63