PeakTech 2170 Bedienungsanleitung Seite 48

4. Operation Instruction
Caution!
It is recommended, that you read the safety and operating
instructions before using the meter.
Warning!
Be sure that the circuit under test has all power removed and
that any associated capacitors are fully discharged before you
make a measurement.
Do not use the meter if test leads, alligator clips and
appearance look cracked and damaged. Please check
periodically.
To avoid electric shock, discharge the circuits completely,
before taking any measurements.
Caution!
When it appears to have abnormal situations, such as you can
not turn on the meter to operate.
1. It is a normal situation, when you cannot turn on the meter
after power off the meter just for few seconds before.
Please wait a moment to turn it on again.
2. When you cannot operate the meter normally, please turn
it off and restart the meter.
3. If use test lead for measurement, please always plug the
"OPEN" plug to the integrated.
48