PeakTech 2170 Bedienungsanleitung Seite 36


Do not exceed the maximum permissible input values
under any circumstances (risk of serious injury and / or
destruction of the device)

Remove the test probes from the measurement object
before changing the measuring function.

Discharge any existing capacitors before measuring the
circuit to be measured.
Measurement environment:

Avoid any proximity to explosive and flammable
substances, gases and dust. An electric spark could lead
to an explosion or deflagration - danger to life!

Do not carry out measurements in corrosive
environments, the device could be damaged or contact
points inside and outside the device could corrode.

Avoid working in environments with high interference
frequencies, high-energy circuits or strong magnetic
fields, as these can negatively affect the measuring
device.

Avoid storage and use in extremely cold, humid or hot
environments, as well as long-term exposure to direct
sunlight.

Only use devices in damp or dusty environments in
accordance with their IP protection class.

If no IP protection class is specified, only use the device
in dust-free and dry indoor rooms.

When working in damp or outside areas, pay particular
attention to completely dry handles on the test leads and
test probes.

Before starting the measuring operation, the device
should be stabilized at the ambient temperature
(important when transporting from cold to warm rooms
and vice versa)
36