PeakTech 2170 Bedienungsanleitung Seite 51

11. SER/PAL key
Used to select series and parallel mode.
12. FREQ key
Press FREQ key to select five different test frequencies in turn:
100/120Hz/1/10/100kHz
13. REL% key
Press REL% key to enter into relative measurement mode. In
auto LCR mode, this key is not available.
14. Backlight key
By pressing this key for once, the backlight of the LCD screen
will be opened and after 60 seconds the meter will
automatically turn off the backlight. It is also possible to turn off
the backlight by pressing this key before the 60 seconds.
15. ENTER key
In sorting mode, press ENTER- key to confirm the data
modification.
16. Guard terminal
Grounding/shielding terminal
17.Input terminal
For direct connection of components to be tested
18.LCur & LPot- terminal
Connect black Kelvin-Test leads
19.HCur & HPot-Sockel
Connect red Kelvin-Test leads
51